Description
EC 1060 NO-NONSENSE
WITH UP TO 150 M3 CAPACITY PER HOUR THE EC 1060 SURE IS BY NO MEANS A LIGHTWEIGHT. IT TAKES LOGS OF UP TO 600 MM WHILE STILL STAYING MOBILE. AN AGGRESSIVE NO-NONSENSE MACHINE THAT SIMPLY GETS THE JOB DONE.
BASE UNIT EC 1060 - STANDARD CONFIGURATION
Power (Diesel/Electro/PTO) 275 - 400 HP (200-300kW)
Output Up to 150 m3/h
Max log diameter Ø 60 cm
Weight (subject to configuration) 9,0 - 12,0 tons
Width 2.50 m
Infeed opening wxh 1.000 x 600 mm
Drum diameter Ø including knives 1.000 mm
No. of knives 4 pcs.
Counterknife, usable at 2 sides 1 pce.
No. of screens (50/70 mm) 1 pce.
Heavy Duty infeed plate in the rear of chipper c/w sand slots and hydraulically foldable for transport. Standard
Replaceable wear plates Standard
1x Hydraulic top feed roll with single drive system, adjustable speed and mounted in heavy duty steel bearing houses Standard
1x hydraulic bottom feed roll with single drive system, adjustable speed and mounted in heavy duty steel bearing houses Standard
Automatic feed system with no stress Standard
Europe Controller with PLC, c/w view chipper data, parameter settings of chipper functions, colour display and proportional valves Standard
Venturi System Standard
Variochip Standard
Long dischar pipe with Venturi Configuration, discharge height 5 m, 360° hydraulically rotatable chute including hyd. flipper adjustment, including wear plates Standard
BASE UNIT - OPTIONS
Sidefeed
Vertical side rollers for branches
Bottom discharge for stationary set-up
Discharge conveyor belt
Radio Remote Control
Flexxaire reversing fan
FEED OPTIONS
Hydraulically open infeed chain (x2) mounted on 90°/180° hydraulically foldable table. The double open infeed chain sorts out sand and rocks and improve lifetime of wear parts inside the chipper.
Stationary table with open chain (x2), with double the length of mobile chipper table. The double open infeed chain sorts out sand and rocks and improve lifetime of wear parts inside the chipper.
POWER OPTIONS
PTO shaft plus pulleys and drive train up to 275 HP
PTO shaft plus pulleys and drive train up to 400 HP
SOFT start package for PTO drive train
CATERPILLAR engine C 7.1 TIER IV Final 275 HP
CATERPILLAR engine C 9.3 TIER IV Final 400 HP
Clutch, cooler and pump drive are included in all engines
Electric motor providing 200 kW c/w hydraulic power pack – no starters
Electric motor providing 300 kW c/w hydraulic power pack – no starters
CRANE OPTIONS
Europe Forestry Crane 4580: capacity 4,5 ton, reach 8,0 meter, assembley to chipper by crane mounting plate, grapple 200 with max opening 1100 mm, c/w rotator, electric oil cooler, double legs in the front and in the rear with individual levers.
Europe Forestry Crane 10095: capacity 10 ton, reach 9,5 meter, assembley to chipper by crane mounting plate, grapple 310 with max opening 1500 mm, c/w rotator, electric oil cooler, double legs in the front and in the rear with individual levers.
CABIN
Cabin normal, including radio, cd, wiper, ventilator and seat
Cabin deLuxe, including airco, heating, remote display, control of chipper, 1200 mm height adjustable, 2 working lamps, 2 foot pedals and 2 levers.
Controls
Mechanical controllers, ERGO
Electricall controllers (Joysticks) plus 6 pcs. DANFOSS PVG32 for load sensing pump
TRANSPORT OPTIONS
Single Axle in the rear, 8 ton, 40 km/h, hydraulic brake plus draw bar
Tandemaxle 12 ton, 40 km/h, hydraulic brake and spring suspension
80 km/h road legal chassis, air brakes and GERMAN TÜV certificate
Container twist lock system
Truck mount frame, anti-torsion
Hooklift frame plus cable system
2-speed steel tracks, 40 cm wide, 15 tons, including rubber pads and radio remote control for tracks